SECOND HAND

Feel free to browse through our selection of clearance items. As these items are sold, they will be deleted from our system. Therefore, we apologise as the range narrows.

We would be delighted to order any item for you at cost from Hornby. If you do not see your requirements, please ask!

Hornby Digital 4 Amp Multi-Purpose Transformer
C7024

Provides extra power to the select unit should it be required. Can also be used with the R8239 power and signal booster.

RRP £36.00

NOW £25.00

Hornby DCC Selcect - Digital Control
R8213

The digital controller is the future of model railways. Capable of individually running up to 60 locomotives (any 10 at one time depending on power) the modeller is able to command their locomotives independantly.

The controller can also operate up to 40 accessories including point motors

** Please remember that locomotives require a DCC decoder chip to run using this system - available below

RRP £89.99

NOW £65.00

Hornby DCC Elite Digital Control
R8214

The digital controller is the future of model railways. Capable of registering up to 255 locomotives (depending on power) the modeller is able to command their locomotives independantly. Includes a USB port to link up to the computer and wide LCD display screen.

The controller can also operate up to 255 accessories including point motors

** Please remember that locomotives need to be DCC ready to run with this system, they also need a DCC decoder chip - available below

RRP £178.99

OUR PRICE £138.99

Hornby Locomotive Decoder
R8215

The locomotive decoder is suitable for any 'DCC ready' locomotives. It can be easily programmed to work with the DCC controllers. Also can work with non-DCC locos, although this will require some re-wiring (full instructions included).

Hornby Points Decoder
R8216

The decoder is suitable for fitting to any point motor and can be easily programmed for use with control units. Can be connectd to up to four point motors.

RRP £35.99

NOW £27.50

In stock

Hornby Electro Point Clips x20
R8232

The pack contains 20 clips for de-isolating points.

RRP £3.30

NOW £2.50

Hornby DCC Select Walkabout
R8235

Up to eight of these units can be connected to a single Select or Elite controller allowing indepenednt management of a further eight locos providing power is available. It is not necessary to connect a power pack to the Walkabout when used in this way

RRP £71.50

OUR PRICE £59.99

Hornby RJ12 Connecting Leads
R8236

For connecting either the Select or Elite to Walkabout Selects

RRP £5.90

NOW £4.50

Hornby RJ12 Connecting Socket
R8237

Required when using several R8236 leads

RRP £2.60

NOW£1.75

Hornby DCC Reverse Loop Module
R8238

To be used when track configurations such as a reverse loop or triangle permanent way sections are used in a circuit.The Hornby Reverse Loop module controls the polarity of the track so that locomotives running around these sections can do so uninterrupted without the use of switches and complicated wiring. Can only be used with the Hornby Digital units.

RRP £30.00

OUR PRICE £24.99

Hornby DCC Power and Signal Booster
R8239

Can be used with the C7024 transormer to provide up to a maximum of 5 amps. The Hornby booster provides more ampage, if required, to power the locomotives as well as boosting the command signals to the locomotive decoders.

RRP £77.75

NOW £50.00

Hornby Digital Power Track
R8241

RRP £4.60

NOW £3.50

Hornby DCC connecting clip
R8242

For connecting the R8216 to the track

RRP £1.75

NOW £1.40

Hornby Locomotive Saphire Decoder (NRMA compliant)
R8245 - new for 2009

Supports 1 Amp continuous current with 1.5 Amp stall. low speed "gear" for shunting operations. Size: 23mm x 16.5mm x 6.5mm. Set amounts of "water" and "fuel" can be stored in the Sapphire providing real time fuel consumption. Burn rates can be selected.

This decoder has a number of additional functions including:

Auto control: Allowing loco start/stop using internal timer (no input needed from controller)

Directional / Independant lighting with numerous functions e.g. strobe, flicker etc

More product information on this decoder can be found here

RRP £22.75

NOW £17.00

Hornby Points Decoder
R8247 - New for 2008

Similar to the R8216,however the CV settings can be adjusted on each output for varying gradiants for "bursts" (e.g. for control of point motors) up to a constant current (for turntables, lighting etc).

RRP £35.99

NOW £26.00

Hornby Locomotive Decoder (NRMA compliant)
R8249

The locomotive decoder is suitable for any 'DCC ready' locomotives. It can be easily programmed to work with the DCC controllers. Also can work with non-DCC locos, although this will require some re-wiring (full instructions included).

More product information on this decoder can be found here

RRP £11.50

OUR PRICE £8.99

Hornby RJ12 4wire 3m Connecting Leads
R8266

For connecting either the Select or Elite to Walkabout Selects

RRP £5.50

NOW £4.00