SECOND HAND

Feel free to browse through our selection of clearance items. As these items are sold, they will be deleted from our system. Therefore, we apologise as the range narrows.

We would be delighted to order any item for you at cost from Hornby. If you do not see your requirements, please ask!

Hornby Digital 4 Amp Multi-Purpose Transformer
C7024

Provides extra power to the select unit should it be required. Can also be used with the R8239 power and signal booster.

RRP £36.00

Now £25.00

Hornby Power supply unit
C990

16V AC output. Not suitable for DC track systems

RRP £15.75

OUR PRICE £12.99

Hornby Pass Contact Switch
R044

Supplies brief pulse of current which point motors need. Supplied with connecting wires

RRP £7.75

NOW £5.25

Hornby Two way lever switch Yellow
R046

Divert power from one circuit to another e.g. with light signals or for turntable / track power changes.

RRP £7.75

NOW £5.25

Hornby On/Off lever switch Green
R047

Conventional on/off switch for for R618 double isolating track. Supplied with connecting wires.

RRP £7.75

NOW £5.25

Hornby Coloured Light Signal
R406

Switches from red to green and back agai. Powered from the accessory power outlet on controller (or other 16V AC supply). Operated by 'on-off' lever switch R046 (not included)

RRP £19.70

NOW £13.00

Hornby Standard power track connector
R602

Standard power connecting clip

RRP £2.20

NOW £1.60

Hornby Train Controller
R8250 - New for 2009

Supplied with 760mm lead to power connecting clip. Requires a power supply unit to operate (see above). Offers variable speed forwards and backwards. Input is 16V AC, output is 0-12V.

RRP £20.50

NOW £14.50

Hornby Train Controller
R965

Supplied with 760mm lead to power connecting clip. Requires a power supply unit to operate (see above). Offers variable speed forwards and backwards.

RRP £20.50

NOW £14.50

Hornby HM 2000 Controller
R8012

A complete transformer and speed control unit with built-in control for two separate trains, extendable to four trains by adding slave control units (HM2000+). Power output is two Amps, with compensation to regularise speed under varying conditions of load. 'Positive off' rotary speed control cuts all power when the control knob is turned to Zero. Features include forward and reverse switch, plus LED indicators for mains supply and output power. Outputs include non-variable AC and DC power for point motors and other powered accessories.

RRP £79.99

NOW £60.00

Hornby HM 2000 Controller - add on
R8013 - L/H controller

HM2000+ controllers plug into the main power controller (HM2000) to increase the number of trains you can control at one time. Recommended maximum is two units, one plugged in on the left side of the main controller and one plugged in on the right, providing control for four trains in all. HM2000+ controllers have all the same control features as the HM2000 master unit.

RRP £29.00

OUR PRICE £24.99

Hornby HM 2000 Controller - add on
R8013A - R/H controller

HM2000+ controllers plug into the main power controller (HM2000) to increase the number of trains you can control at one time. Recommended maximum is two units, one plugged in on the left side of the main controller and one plugged in on the right, providing control for four trains in all. HM2000+ controllers have all the same control features as the HM2000 master unit.

RRP £29.99

OUR PRICE £24.99

Transformer / Controller Live Steam
R8205

Controller and Transformer Pack

Seperate controller and transformer set to operate your Live Steam locomotive.

RRP £131.25

OUR PRICE £114.99

Hornby DCC Selcect - Digital Control
R8213

The digital controller is the future of model railways. Capable of individually running up to 60 locomotives (any 10 at one time depending on power) the modeller is able to command their locomotives independantly.

The controller can also operate up to 40 accessories including point motors

** Please remember that locomotives require a DCC decoder chip to run using this system - available below

RRP £89.99

NOW £65.00

Hornby DCC Elite Digital Control
R8214

The digital controller is the future of model railways. Capable of registering up to 255 locomotives (depending on power) the modeller is able to command their locomotives independantly. Includes a USB port to link up to the computer and wide LCD display screen.

The controller can also operate up to 255 accessories including point motors

** Please remember that locomotives need to be DCC ready to run with this system, they also need a DCC decoder chip - available below

RRP £178.99

OUR PRICE £138.99

Hornby Locomotive Decoder
R8215

The locomotive decoder is suitable for any 'DCC ready' locomotives. It can be easily programmed to work with the DCC controllers. Also can work with non-DCC locos, although this will require some re-wiring (full instructions included).

Hornby Points Decoder
R8216

The decoder is suitable for fitting to any point motor and can be easily programmed for use with control units. Can be connectd to up to four point motors.

RRP £35.99

NOW £27.50

In stock

Hornby DCC Select Walkabout
R8235

Up to eight of these units can be connected to a single Select or Elite controller allowing indepenednt management of a further eight locos providing power is available. It is not necessary to connect a power pack to the Walkabout when used in this way

RRP £60.00

OUR PRICE £49.99

Hornby DCC Power and Signal Booster
R8239

Can be used with the C7024 transormer to provide up to a maximum of 5 amps. The Hornby booster provides more ampage, if required, to power the locomotives as well as boosting the command signals to the locomotive decoders.

RRP £77.75

NOW£50.00

Hornby DCC connecting clip
R8242

For connecting the R8216 to the track

RRP £1.75

NOW £1.40

Hornby Locomotive Saphire Decoder (NRMA compliant)
R8245 - new for 2009

Supports 1 Amp continuous current with 1.5 Amp stall. low speed "gear" for shunting operations. Size: 23mm x 16.5mm x 6.5mm. Set amounts of "water" and "fuel" can be stored in the Sapphire providing real time fuel consumption. Burn rates can be selected.

This decoder has a number of additional functions including:

Auto control: Allowing loco start/stop using internal timer (no input needed from controller)

Directional / Independant lighting with numerous functions e.g. strobe, flicker etc

More product information on this decoder can be found here

RRP £22.75

NOW £17.00

Hornby Points Decoder
R8247 - New for 2008

Similar to the R8216,however the CV settings can be adjusted on each output for varying gradiants for "burts" (e.g. for control of point motors) up to a constant current (for turntables, lighting etc).

RRP £35.99

NOW £26.00

Hornby Locomotive Decoder (NRMA compliant)
R8249 - New for 2008

The locomotive decoder is suitable for any 'DCC ready' locomotives. It can be easily programmed to work with the DCC controllers. Also can work with non-DCC locos, although this will require some re-wiring (full instructions included).

More product information on this decoder can be found here

RRP £11.50

OUR PRICE £8.99

6 for £51.00 (£8.50 EACH!!)

12 for £99.60 (£8.30 EACH!!)